 |
| More information on the 5920 model |
  |
Memory flashing |
| The memory flashing function
makes the spin-down easy and simple by storing previous
spinning time automatically then recalling repeatedly.
Pressing the flashing key, the same operation whose spinning
time is from 1 second to 90 seconds can be repeated. |
|
Five channel memory settings |
| The memory setting function
makes routine work easy and simple, storing centrifugal
speed, RCF and time. It is possible to save, recall and
operate the centrifugal condition just by pushing the
program switches. |
|
Acceleration/Deceleration (Three-level switching) |
| The 5920 model provides
Three-level switching for both acceleration and deceleration,
corresponding to application requirements. For example,
in those cases where one must avoid whirring up the samples,
a slow deceleration can be programmed so as to achieve
the desired conditions and most accurate results. |
|
g.sec integrator function |
| The g.sec integrator
function optimizes the protocols in those cases where
customers need to achieve exactly the same centrifugal
effect. One can obtain the same effect just by setting
the g.sec value in the 5920 model. The g.sec integrator
function enables one to control centrifuge spins with
the same centrifugal effect and to calculate g.sec value. |
|
Tachometer-port |
| The 5920 has a tachometer-port
on its lid to check the actual speed. The validation of
the speed sensor by measuring the actual speed is highly
needed for stringent GMP requirements. |
|
Alarm indicator and automatic stop functions |
| Various alarm indicators
and automatic stop functions improve safety further and
stop the operation immediately after activation in the
case of an emergency. The 5920 model is equipped with
an alarm indication function including imbalance detection,
abnormally high temperature detection, speed sensor and
temperature sensor fault detection. The rotor sensor detects
whether the rotor is set correctly to the drive shaft.
In addition, the unit is fitted with a circuit breaker
is fitted. |
|
Foot pedal
(Option) |
| An optional foot pedal
(option) allows hands-free lid opening, enabling the interlock
mechanism to be released by a foot pedal. |
|
