KUBOTA 日本久保田离心机产品一览
首页
产品一览
+2800
  + 技术规格
  + 转子一览
  + 转子/吊桶/
     试管架列表

  + 更多信息
公司简介
离心力计算
联系经销商
联系我们
站点导航
ISO logo
KUBOTA久保田的藤冈工厂于1996年通过ISO9001 认证。
转子 / 吊桶 / 试管架列表 2800型
资料下载PDF logo

Rotor Name Nominal Capacity Tube Size (mm)
diam. x length
Maximum Speed
(rpm)
Maximum RCF
(xg)(*1)
Bucket Code No. Tube Rack Adaptor Code No.
Swinging Bucket Rotor
RS-240
48 x 2mL(*2) 9.5-11 x 36-60 4,000 1,950 053-5040 -
40 x 6mL(*2) 12.5-13.3 x 36-80 4,000 1,970 053-5030 -
24 x 5mL narrow blood collecting tube /10mL(*4) 12.5-13.3 x 46-105 4,000 2,430 053-5850 -
4 x 10mL blood collecting tube/15mL 15-17.2 x 86-110 4,000 2,540 053-4910 -
4 x 15mL Conical (TC) 17 x 121 4,000 2,580 053-4910 -
8 x 10mL blood collecting tube/15mL 15-17.2 x 86-110 4,000 2,520 053-4900 -
8 x 15mL Conical (TC) 17 x 121 4,000 2,580 053-4900 -
16 x 10mL blood collecting tube/15mL 15-17.2 x 86-110 4,000 2,500 053-4980 -
24 x 10mL blood collecting tube/15mL 15-17.2 x 89-105 4,000(*5) 2,490 053-7340 -
4 x 10mL blood collecting tube/15mL 15-17.8 x 87-110 4,000 2,500 053-4990 055-7400(*9)
4 x 50mL 27-37 x 95-110 4,000 2,540 053-4990 -
4 x 50mL Conical (TC) 30 x 117 4,000 2,560 053-5010 -
4 x 15mL/50mL Conical (TC) 17 x 121/30 x 117 4,000 2,610/2,500
053-5010 055-6010(*3)

TOP返回页首
Microtiter Plate Rotor
RMP-23 6 x Microtiter Plate 86(W) x 128(D) x 52(H) 4,000 1,790 Bucket included -
2 x Deep-well Plate
(*1) To show the RCF exactly, input the rotation radius. At the factory, the rotation radius is pre-set at 14.6cm. The above Maximum RCF is the calculated value at the maximum speed at each rotation radius.
(*2) The support can be produced for special tube size. Please contact your local dealer.
(*3) This adaptor is used commmonly for both 15mL and 50mL conical tubes.
(*4) The blood collecting tube is the Hemolyse tube made by Becton & Dickinson.
(*5) In the case of 15mL taper tubes, please operate at 3,000rpm or less. Bucket 053-7340 is exclusively used with 2420/2800.

TOP返回页首

久保田商事株式会社 版权所有 2006-2010年