 |
| More information on the 2100 model |
Digital display and control knob |
| The control knob and
digital display provide users with an easy-to-operate
interface. The control knob is much easier to set than
up-down-keys, and the degital display clearly indicates
each parametier. |
|
Various time setting |
| Despite its compact size,
the 2100 has a wide range of time settings to meet any
requirements. Time value can be set in increments of 1
second or 10 seconds for short time setting and in
increments of 1 minute or 10 minutes for extended settings
of up to 900 minutes. Of course, it can be used with time
holding function. |
|
Clean Motor |
| Equipped with a closed
system DC high-torque motor, the 2100 prevents carbon
dust from spattering. It makes it possible to perform
a centrifugal operation in a clean way. |
|
Balancing of the sample |
| The 2100 model enables
one to reduce the experiment time, allowing centrifugal
separation to be carried out with eye measured sample
balancing. With its tolerable inbalance sensor, it is
not necessary to balance the sample with remarkable accuracy.
In addition, the operation is smooth and it maintains
a quiet environment. |
|
Acceleration/Deceleration (Two-level switching) |
| The 2100 model provides
two-level switching for both acceleration and deceleration,
corresponding to application requirements. For example,
in those cases where one must avoid whirring up the samples,
a slow deceleration can be programmed so as to achieve
the desired conditions and most accurate results. |
|
